Filter
Top Products
July 2006 Preparing for installation
201i Server Hardware Installation 37
6 Set the following:
SCSI IDs on the CD-ROM and tape drives (see pages
124 and 126)
DIP switches on the CD-ROM drive (see page 124)
device termination on the CD-ROM and tape drives (see
page 128)
❒
7 Insert the 201i server into two consecutive slots inside the
switch. For instructions, see:
large Meridian 1 systems, such as Option 51C (see page
54)
Option 11C or Option 11C Mini (see page 70)
Succession 1000 (see page 105)
❒
8 Install the MPC cards, if required (see page 138). ❒
Step Description Check