Filter
Top Products
July 2006 About the 201i server
201i Server Hardware Installation 15
Two Ethernet controllers on the 201i server motherboard provide Ethernet
capability. These controllers provide the network interfaces for both the
embedded LAN (ELAN) and customer LAN (CLAN). The connections to
the ELAN and CLAN are established by using the multi I/O cable described
on page 26.
Note: The secondary backplane connector connects the 201i server to the
second slot on the shelf, thereby providing access to the voice channels
provided by that slot.
ATTENTION
The 201i server is shipped ready for installation into an
Option 11C or Option 11C Mini switch or Succession 1000
system. Before you install the 201i server in a larger
Meridian 1 switch (for example, Option 51C), you must
move the secondary backplane (DS30X) connector to the
correct position. For more information, see “Repositioning
the secondary backplane connector” on page 48.