Filter
Top Products
Installing the 201i server in the Succession 1000 system Standard 1.03
114 CallPilot
To replace the front bezel
1 Align the two posts and the locking tab on the rear of the front bezel with
the slots on the inside front cover plate.
2 Push the bezel toward the Media Gateway or Media Gateway Expansion
until it snaps into place.
3 Replace the SUCCESSION label.
What’s next?
Continue with “Connecting cables to the Succession 1000 system” on page
115.
.
WARNING
Risk of eye injury
Nortel recommends that you operate the Media Gateway and
Media Gateway Expansion with their front bezels installed.
When the blue LEDs inside these units are lit, they are very
bright.
G101622