Filter
Top Products
Installing the 201i server in the Succession 1000 system Standard 1.03
106 CallPilot
To install the 201i server inside the Media
Gateway or Media Gateway Expansion
1 Ensure that no cables are connected to the slots in which you are
installing the 201i server.
2 Open the lock latches at the top and bottom of the 201i server faceplate.
Note: When you open the top lock latch, it breaks the yellow backplane
warning label if it has not been removed. The label is not relevant for
Succession 1000. Remove the label and continue with this procedure.
3 Slide the 201i server into an unoccupied pair of slots.
Ensure that the 201i server is positioned correctly between the slots.
When correctly inserted, the top of the 201i server is on the left. See the
following diagram:
G101588b