Filter
Top Products
Connecting peripheral devices to the 201i server Standard 1.03
146 CallPilot
The following diagram shows cable connections, where the CD-ROM
drive is the first device:
Note: Alternate SCSI device connection scenarios are supported, but
are not depicted in this guide. If you want to use a connection scenario
that is not described in this guide, ensure that you use appropriate
cabling for each SCSI device.
5 Connect the power cord for each device.
6 Power up the devices.
7 Continue with “What’s next?” on page 150.
Option 11C
201i cabling Peripheral cabling
201i
NTRH30AA
Optional
NTRH9038
Tape drive
NTRH9105
CD-ROM
drive
CD-ROM drive SCSI
cable NTRH3502
G101434
Tape drive SCSI cable
NTRH3502
Bracket
assembly
NTRH1407