Network connection :: 135
I can’t tell if data services are available
The following icons indicate data services:
Wireless Mode is on and a GPRS network is within range.
Wireless Mode is on but you are not connected to any GPRS
network.
You are connected to a GPRS network and a data session is
active (for example, when you are browsing the web). You can
still receive calls.
You are actively using a dial-up (CSD) connection.
Wireless Mode seems to turn off by itself
If a system error and reset occurs, Treo automatically turns on Wireless
Mode if it was on before the reset. However, if the Treo can’t determine
whether Wireless Mode was on before the reset, it does not turn on
automatically (see page 14).
Treo won’t connect to the Internet
Your Treo supports GPRS. To connect to the Internet, you must subscribe to
and activate GPRS data services with your mobile service provider.
•Press and hold the Wireless Mode button to turn off Wireless Mode.
Then, press and hold the same button to turn it back on again.
•Perform a soft reset (see page 131).
•For additional suggestions, see www.handspring.com/support.