Handspring 600 PDAs & Smartphones User Manual


 
Charging the battery
Before using your Treo, you need to charge the battery. It may not turn on at
all when you first remove it from the box. We recommend three hours for a
full charge, or until the LED is solid green.
1. Plug the AC charger into a wall outlet. If necessary, connect an adapter.
2. Connect the charger cable to the bottom of the Treo with the word UP
facing the same way as your Treo screen.
A. LED
3. To confirm your Treo is charging, check the LED.
•When the LED is solid red, your Treo is charging.
•When the LED turns solid green, your Treo is fully charged.
If the LED does not turn on when you connect your Treo to the
charger, double-check the cable connection and the electrical outlet
to which it is connected.
After you turn on your Treo, the onscreen battery gauge displays power status:
Full battery icon : Battery is charged
Partial battery icon : Battery has some power and is not charging
Empty battery icon : Battery needs charging immediately
Red lightning bolt : Charging
Green lightning bolt with full battery : Fully charged
A
12 :: Charging the battery
Battery consumption varies
based on your personal
usage. Consumption factors
include signal strength,
backlight and speakerphone
usage, and whether calls
are data or voice calls.