Filter
Top Products
,QVWDOOLQJD'LVSOD\ 8QLW
BusinessPhone Call Centre Supervisor - Standard
Installation Guide
EN/LZT BS 102 063/S R2B
41
25 way D Type Connector
Connect the sleeve pin of the 3.5mm plug to the cable shield. Connect the other
end of the shield to PIN 7 of the DB25 connector.
Connect the data-out signal from the display to the tip of the 3.5mm plug. Con-
nect the other end to PIN 3 of DB25 connector.
Connect the data-in signal from the display to the centre ring of the 3.5mm plug.
Connect the other end to PIN 2 of DB25 connector.
25 way D Type Connector
9 way D Type Connector
Connect the sleeve pin of the 3.5mm plug to the cable shield. Connect the other
end of the shield to PIN 5 of the DB9 connector.
Connect the data-out signal from the display to the tip of the 3.5mm plug. Con-
nect the other end to PIN 2 of DB9 connector.
Connect the data-in signal from the display to the centre ring of the 3.5mm plug.
Connect the other end to PIN 3 of DB9 connector.
9 way D Type Connector
Pin 2 - Serial Out
Pin 7 - Ground
Pin 3 - Serial In
Pin 3 - Serial Out
Pin 5 - Ground
Pin 2 - Serial In