Filter
Top Products
MDF connections to stations and the public switched telephone network
64 Installing and Connecting the MDF and Telephones
Figure 30: Example 4-pair labeling to information outlet
Labeling expansion control carrier cable
(MCC1 Media Gateway only)
To label the expansion control carrier cable:
1. Place the appropriate AUX connector label on the assigned 110-type terminal block row.
2. On the expansion control carrier cable, place a yellow auxiliary label on the connectors at
each end of the cable.
3. Write “AUX” on each label.
Figure notes:
1. Equipment Room
2. To Central Location for Terminals 1
through 6
3. Blue Row on 110 Terminal Block
4. Purple Row on 110 Terminal Block
5. To Port Connector on Media Gateway
(Media Gateway 1, Position B, Slot 03)
6. 258A Adapter
7. D-Inside Wire Cut Down to
Connecting Block
8. Information Outlet
9. Telephone
crdf4prCJL 102996