Filter
Top Products
Testing port network equipment
Issue 3 January 2008 139
Figure 62: Sample IPSI 01A test results screen — Page 1, Avaya S8700 Multi-Connect
Testing Expansion Interface circuit packs, if used
To check each Expansion Interface (EI) circuit pack in the media gateway:
1. Type test board UUCSS where UUCSS is the cabinet, and slot for an EI circuit pack in the
media gateway, and press Enter.
Note:
Note: Labels on the port network and on the strip under the circuit pack contain this
information.
2. Verify the screen displays test results similar to Figure 63: Sample test results for
Expansion Interface Board 2A01 on page 140. This example is for board 2a01.
3. If any result is FAIL, check the connections for the fiber optic link.
4. Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
test ipserver-interface 1a Page 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A TONE-BD 46 PASS
01A TONE-BD 52 PASS
01A0201 ETR-PT 42 PASS
01A0201 ETR-PT 43 PASS
01A0202 ETR-PT 42 PASS
01A0202 ETR-PT 43 PASS
01A0203 ETR-PT 42 PASS
01A0203 ETR-PT 43 PASS
01A0204 ETR-PT 42 PASS
01A0204 ETR-PT 43 PASS
01A0205 ETR-PT 42 PASS
01A0205 ETR-PT 43 PASS
01A0206 ETR-PT 42 PASS
01A0206 ETR-PT 43 PASS
01A0207 ETR-PT 42 PASS
press CANCEL to quit -- press NEXT PAGE to continue