Filter
Top Products
Aastra IP Phone Model 9480i CT
A-22 41-001134-05, Rev 00, Rel. 1.1
AastraLink Pro 160 IP Phone User Guide
Charging Cradle
The charging cradle is designed to be placed on a desk or any appropriate flat
surface. To set up the charging cradle:
1. Plug the modular cord of the power adapter into the jack on the bottom of the
cradle. Route the cord through the retaining tabs of the molded cord slot.
Verify the cradle rests on all four feet and does not wobble.
2. Plug the other end of the power adapter into a non-switched AC outlet. We
recommend that the adapter should not be plugged into an electrical power
bar, and should be the only item plugged into the AC outlet.
Installing and Charging the Battery
The handset is powered by a nickel metal hydride battery pack. To install and
charge the battery:
1. Place the battery pack in the battery compartment with the connector wires
pointing towards the bottom of the handset.
2. Connect the battery terminal wire to the charging pins within the battery
compartment.
Non-switche
d
AC Outlet