Filter
Top Products
Managing Calls
41-001134-05, Rev 00, Rel. 1.1 3-17
Operating Your Aastra IP Phone Using the Web UI
Note: For instructions on how to assign Find-Me Follow-Me to a softkey on your Aastra IP phone,
see “Configuring SoftKeys For Your IP Phone” on page 3-25.
3Set the “Mode” field to one of the following options:
• Off - Disables Find-Me Follow-Me.
• Parallel - The Primary and Secondary phones ring simultaneously.
• Sequential - The Primary phone rings first. If you do not answer the call, then the Secondary
phone rings.
Note: You have 30 seconds to answer a call on your primary phone. If you do not answer the call
within this time limit, Find-Me Follow-Me progresses to the next stage (i.e., your secondary phone
rings).
4 Do the following actions:
• Specify the Primary phone number (if you set the mode parameter to sequential, this is the
number that rings first).
• Specify the Secondary phone number (if you set the mode to sequential, this is the number that
rings next, if you do not answer your primary number).
5 Click <Save> to save your changes.
The Home menu updates. The Find-Me Follow-Me field reflects the rules you specified in Step 3.
To disable Find-Me, Follow-Me, set the
Mode parameter to Off and click Save.
AastraLink Web UI
Step Action