Filter
Top Products
Administrator Menu
41-001134-05, Rev 00, Rel. 1.1 2-81
Operating Your Aastra IP Phone Using the Phone UI
Administrator Menu
The IP Phone has an administrator menu available for an administrator only.
Access to this menu is password protected.
Available options for an administrator are:
• UPnP (Universal Plug n’Play) - Allows an administrator to enable/disable
UPnP on the phone
• Factory Default - Allows an administrator to reset the phone to factory
default settings.
Enabling/Disabling UPnP
Use the following procedure to enable/disable Universal Plug-n-Play (UPnP) on
your IP phone. When you install and start up an IP phone at a remote office, UPnP
must be enabled on the IP phone and the local Internet router, or manual NAT
must be configured on the phone with static port forwarding on the router (in
order for the phone to communicate with the AastraLink Pro 160 at the central
site)
.
Reference
For more information about setting your phone to use UPnP on a remote phone,
see C, “Remote Office Installation and Configuration of the Phone (Phone
-Side).”
Aastra IP Phone UI
Step Action
1 Press to enter the Options list.
2Select UPnP, then press Select.
3 Press Change to set the UPnP to Yes/No, then press Done.