Filter
Top Products
DECTover IP
®
Configuration
86
Browser. Alternatively, you can also go to the Configurator, to the page
Telephony: Devices: DECTover IP and click on the WLAN Config. button. Log in
under the User Name “Administrator” and enter the same password as for the
Aastra 800.
DECTover IP/OpenMobility Managers Login Page
The WLAN function and the function of the DECT over IP/OpenMobility Manager
cannot be used simultaneously on the same DECT over IP base station, so you will
always need at least two DECTover IP base stations. The WLAN settings are then
made as follows:
1. Set up the existing DECT over IP base stations in theAastra 800’s Configurator.
Go to the DECT over IP Manager’s Web Configurator.
2. On the WLAN Profiles page, configure at least one set of settings (see below
under: Setting up a WLAN Profile). Note down the password you have used
(“Pre-Shared Key”), so that you will be able to use it again later when setting up
wireless user terminals or notebooks.
3. Assign the desired WLAN profile on the Radio Fixed Parts page. Click on
spanner symbol ( ) on the left next to the relevant DECT over IP base station.
Under WLAN Settings select the number of the configured WLAN Profile.
Confirm your settings with OK. You can use one profile for multiple
DECT over IP base stations.
You can now use the WLAN function of your WLAN-enabled DECT over IP base sta-
tions and set up the user terminals as required.