Filter
Top Products
Voice over IP (VoIP) Quick Start
61
Type. To configure a third party SIP telephone, select the “SIP” option. Enter an
internal Phone No. Click on Apply.
2. Call up the User Manager: User page. Assign the new internal call number to a
user.
Tip: Internal SIP telephones can also be operated by users without
passwords. If you do not assign the call number of the SIP tel-
ephone to a user, you can only configure a “Guest” user ac-
count on the SIP telephone.
3. An internal SIP telephone can be operated with a dynamically assigned IP
address. If the SIP telephone has its own Web interface, for example, a static IP
address can be practical. Click on New on the Network: DHCP page. Enter the
MAC address of the SIP telephone and an available IP address and click on
Apply.
4. Configure the SIP telephone or the SIP telephony software. Please also refer to
the configuration help on the Telephony: Devices: VoIP Phones page. For the
desired call number, click on (Help) and select a suitable help page under
Type.
A configuration dialog of SIP telephony software