Filter
Top Products
DECTover IP
®
Configuration
84
Also change the Mode setting on the Telephony: Devices: DECTover IP page to
“IP address configured local” and enter there the configured IP address for the
DECT over IP Manager. All other base stations can be operated using either a fixed
IP address or an IP address assigned dynamically via DHCP. Please refer to the
information given in the chapter entitled LAN DHCP Server starting on page 73.
Note: A base station cannot be operated as a DECT over IP
Manager and a WLAN-Access Point simultaneously.You
should therefore use a DECTover IP base station which does
not have WLAN function as your DECT over IP Manager.
Create a separate entry for each DECTover IP base station and for the DECTover IP
Manager on the Telephony: Devices: DECTover IP page. You use these entries to
determine the VoIP data compression (“Profile”).
Configurator: Telephony: Devices: DECTover IP
User administration and set-up of DECT terminals is done in the Configurator of
the Aastra 800 as well.
The DECTover IP Manager offers a separate web user interface to manage the set-
tings of devices with WLAN functions. Therefore at least one WLAN-RFP has to be
configured. If everything is configured correctly, you will see the WLAN Config
link. Login as the user “Administrator” with the currently set administrator’s
password of the Aastra 800.