Filter
Top Products
Installation LAN Integration
34
corresponding query if this is the case. Select the Ethernet adapter to be used for
the VoIP communication in the LAN.
You may check the LAN connection selected at any time and alter it as necessary.
Access the Web console of the Aastra 800 communications system to do so.
1. Select the System Info: Network: IPConfig page in the Configurator.
System Info: Network: IPConfig
The currently selected LAN connection appears as “eth0 (Lan)”. The other
entries in the display show other LAN connections and the assigned IP
addresses.
2. In order to activate another LAN connection, you must enter the assigned IP
address in the “hosts” system file under the “aastra800” name. Select the Run
command in the Windows start menu.
3. Enter the following: “notepad %SystemRoot%\system32\drivers\etc\hosts”
and confirm with the enter key. IP addresses can now be manually assigned to
DNS names in the system file now open.
4. Add the entry for the DNS named “aastra800” or change an existing entry for
this DNS name. If you wish to activate “eth3” for example as shown above, you
must enter the following:
“192.168.112.3 aastra800”
5. Select the Exit command in the File menu and confirm the save query with
Ye s .
6. Restart the Aastra 800 communications system.