Filter
Top Products
Factory Settings on Delivery Telephony Basic Settings
10
2. Factory Settings on Delivery
The following basic settings and features are active after you have installed the
Aastra 800 communications system. We recommend that you configure the
Aastra 800 communications system to suit your individual requirements before
using it (see Configuration starting on page 49).
2.1 Telephony Basic Settings
■ There are no pre-configured telephony terminals.
■ Aastra 800 is configured ready for use in Germany.
■ An inactive SIP trunk with the name “SIP” is configured. This SIP trunk is bound
to the “External trunk” route using the line seizure code “0”.
■ All newly configured terminals ring if there are incoming external calls.
■ The password for the “Administrator” user is empty.
■ The system PIN is set at “0000”.
2.2 Authorisations
The allocation of authorities regulates which functions terminals on Aastra 800
can use. These authorities are configured for so-called user groups, to which users
and their terminals are then assigned.
Three user groups are preset: “Administrators”, “Standard” and “Guests”. “Adminis-
trators” can access all functions in Aastra 800 and have unlimited configuration
rights. Users in the “Guests” group can not configure Aastra 800, may not make
any external calls and can only use a limited range of Aastra 800 terminal func-
tions. The “Standard” user group is well suited as a starting point for creating user
groups for normal users of the system (e. g. the staff members of a company)
because of its default settings.