Filter
Top Products
Configuring Softkeys
84 41-001524-00 REV00 – 04.2014
Speed Dial/Xfer
The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Transfer
key allows a call to be transferred to other recipients blindly or consultatively. The Speed Dial/Xfer key combines the
Speed Dial and Transfer keys’ functionality together allowing the user to transfer calls or speed dial with one key.
Speed Dial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key causes the
phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed Dial/Xfer key blind
transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the call back) by
pressing the line key again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed Dial/Xfer key forwards
the call to the predefined extension.
Configuring a Speed Dial/Xfer Key Using the Aastra Web UI
Note:
It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the Speed Dial/Xfer
feature. For more information about this parameter, see “Switch UI Focus to Ringing Line” on page 152.
Aastra Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Speed Dial/Xfer.
4. In the Label field, enter a label for the Speed Dial/Xfer key.
5. In the Value field, enter the speed dial extension or the extension to transfer calls to (for example, 3600).
6. In the Line field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 9