Filter
Top Products
Configuring Softkeys
82 41-001524-00 REV00 – 04.2014
BLF/Xfer
The BLF key allows one or more extensions to be monitored, and once there is any state change with those extensions,
the key shows the status of the monitored lines. The Transfer key allows a call to be transferred to other recipients
blindly or consultatively. The BLF/Xfer key combines the BLF and Transfer keys' functionality together allowing the user
to transfer calls or use BLF with one key.
BLF/Xfer Key Requirements and Functionality
• BLF/Xfer and BLF: A BLF/Xfer key can be configured for subscribing to an extension and monitor the status of the
extension, similar to the BLF key functionality. Changes of the state of the monitored extension are indicated by the
key’s graphical button image as well as the key’s LED.
• BLF/Xfer and Blind Transfer Calls: When the focused line is in the connected state, pressing the BLF/Xfer key transfers
the call to the extension unconditionally, disregarding the status of the monitored extension.
If transferring a call to an extension fails, a message Transfer Failed displays on the phone, and you can reconnect the
call (get the call back) by pressing the line key again.
• BLF/Xfer and Call Forward: When the focused line is in the ringing state, pressing the BLF/Xfer key forwards the call to
the extension unconditionally, disregarding the status of the monitored extension.
• BLF/Xfer and Speed Dial: When the focused line and the monitored extension are idle, pressing the BLF/Xfer key
causes the phone to go offhook and dial the number of the extension.
Note:
BLF/Xfer functionality can only be programmed on the left softkeys.
Note:
It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the BLF/Xfer feature.
For more information about this parameter, see “Switch UI Focus to Ringing Line” on page 152.