Filter
Top Products
Configuring Softkeys
78 41-001524-00 REV00 – 04.2014
Park/Pickup Keys
The 6867i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ call managers.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable Park key to park the call
• After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the call
Administrators can configure the Park and Pickup keys for any line using the configuration files or the Aastra Web UI.
Users can make changes to customize the label of the Park and Pickup keys using the Web UI.
Configuring Park/Pickup Keys Using the Aastra Web UI
Aastra Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Park.
4. In the Label field, enter a label for the Park softkey.
Note:
The Value and Line fields are configured by the Administrator.
5. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
6. Select from Key 1 through Key 20.
7. In the Type field, select Pickup
8. In the Label field, enter a label for the Pickup softkey.
Note:
The Value and Line fields are configured by the Administrator.
9. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
10. Click Save Settings.
11. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Expansion Module Keys
12. Select from Key 1 through Key 16.