Filter
Top Products
Configuring Softkeys
80 41-001524-00 REV00 – 04.2014
Last Call Return Key
Using the Aastra Web UI, you can configure the Last Call Return function on a key. If you configure Last Call Return on a
key, and a call comes into your phone, after you are finished with the call and hang up, you can press the key configured
for Last Call Return and the phone dials the last call you received. When you configure an Last Call Return key, the label
LCR displays next to that key on the IP phone. When the Sylantro call manager detects an Last Call Return request, it
translates this request and routes the call to the last caller.
Configuring a Last Call Return Key Using the Aastra Web UI
Aastra Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Last Call Return.
4. In the Line field, select the line you want to apply to this key.
Valid values are 1 through 9.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 16.
7. In the Type field, select Last Call Return.
8. In the Line field, select the line you want to apply to this key.
Valid values are 1 through 9.
9. Click Save Settings.