Filter
Top Products
LCD Operation
Messages
86 Strata DK Electronic Telephone 5/00
Messages
The LCD on your telephone can be used to send or receive
messages to/from other LCD telephone users (sample shown
at right). It can also display the names/numbers of the person
calling your telephone or the name of the person you are calling. Names and memos
can also be set to display with speed dial numbers and timed reminders.
You can write or edit a station message (10~19), “fill in the blanks” of system
messages 62~64, enter a name/title that you want to display when other stations call
your station (see “Name/Number Display” on Page 98), or enter a Speed Dial (see
“Speed Dial Memos” on Page 96) or Timed Reminder memo (see “Timed Reminders”
on Page 69).
System messages 65~99, if available, are written by the System Administrator and
cannot be edited by the user
➤ To enter LCD characters
...or
. The lost call prior to the call
displayed after pressing
6&5/ is displayed.
3. Press
&2
...or a [DN] + CO
Line access code.
You hear dial tone.
4. Press
/&$'. The DK System auto dials the digit “1” before dialing
the saved, outgoing telephone number.
1. Access message/
memo/name display.
A cursor (—) appears at the first character in the
display.
MS. DOE
7143723546
BACK AT 2-PM-CALL
MEETING FOR 3PM