Filter
Top Products
LCD Operation
Messages
90 Strata DK Electronic Telephone 5/00
➤ To cancel an advisory message that has been set at your station
➤ To set an advisory station message for a remote station
2. Enter the desired
message number:
~ (station)
...or
~ (system)
The selected message
displays. This assumes the
message has already been
stored in memory.
3. Press
/&'0
...or 63.5.
The message displays on your LCD. The LCD M
[PDN] LED lights continuously. The selected message
is sent to LCD phones when they call your [PDN] or
any [PhDN] owned by the telephone.
4. Press
3$*( to
display the message
instead of the CF
display if you have
Call Forward set.
➤ Press
/&'0
...or [PDN] + +
63.5.
The LED goes out. If a station message was sent, this
procedure does not erase it.
1. Press
02'( +
while your telephone
is idle.
2. Dial the destination
[PDN].
207 = the destination [PDN]
3. Press
3$*(.
MSG NO. 10
MODE 95
DEST EKT NO.?
MODE 95 DEST EKT
EKT NO. 207
MW TO ST123
MSG NO?