Filter
Top Products
Features
Speed Dial
66 Strata DK Electronic Telephone 5/00
Speed Dial Pause
Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. This enables up to 36 digits to
be stored under one Station
6SHHG'LDO button or code. Typically, long, frequently
used access numbers are stored as part of this digit string. The System Speed Dial
number dials out first, then the number linked to it.
Note A designated station can be used to link System Speed Dial codes. See the
System Administrator User Guide.
Important! Before linking Speed Dial Numbers, make sure the System
Administrator has stored the desired number in the System Speed Dial
that you are planning to use.
Hookflash Regular Pause Long Pause
The 0:)/ is programmed to
allow a 0.5 or 2 seconds long
(set in system programming)
CO line hookflash when
inputting Speed Dial numbers. It
is displayed on the LCD as “F-”.
Press 0:)/
...or enter the hookflash dial
code (&21)7516 + ).
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays “P-”.
Press3$8
.
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays “L-”.
Press 3$8/.
Note Your telephone must have a 3$8 key to allow 0:)/ to be used to store a hookflash in Speed
Dial.