Filter
Top Products
LCD Operation
Caller ID/ANI/DNIS Information Mode
82 Strata DK Electronic Telephone 5/00
Caller ID/ANI/DNIS Information Mode
Automatic Number Identification (ANI) information cannot co-exist on the same
telephone LCD with Dialed Number Identification Service (DNIS) information. If
your system is programmed to receive both ANI and DNIS information on incoming
calls, press
3$*( while the call is ringing to alternate between DNIS and ANI/Caller
ID LCD displays. After you answer the call, you cannot alternate between displays.
DNIS
Incoming DNIS telephone numbers can be correlated in the system database with
assigned DNIS names. These names, up to 16 alphanumeric characters, display on
your telephone’s LCD, enabling incoming calls to be instantly identified and
appropriately answered. Table 9 on Page 83 shows DNIS samples.
ANI/Caller ID
If your telephone is programmed to receive Caller ID names and numbers, the calling
party name displays.
➤ To display the number while the call is ringing
Table 9 on Page 83 shows ANI samples. If Caller ID was activated, then the caller
name and/or number would appear on the first line.
➤ To activate the Caller ID/ANI or DNIS display mode
➤
Press 02'( + . The system default is ON.
➤ To deactivate the Caller ID/ANI or DNIS display mode
➤
Press 02'( + .
➤ While the call is
ringing, press
3$*(.
MR. JONES
LINE 3 RINGING