Filter
Top Products
Features
Speed Dial
62 Strata DK Electronic Telephone 5/00
➤ To store/replace a telephone number on a Station Speed Dial button
➤ To clear a telephone number on a Station SD button
➤
Repeat the previous procedure, skipping Step 3.
➤ To program one-touch telephone number dialing
➤ To make a call using a SD button or access code
1. Press
5'/ (or )
with the handset on-
hook
2. Press
6' to store the
telephone number on
6' buttons are assigned in system programming.
...or 6'6 (or
) and enter the Speed Dial code that you want to store the
telephone number in. See Table 14 on Page 110 for codes.
3. Enter the telephone number (max. 20 digits).
To store longer dialing strings, see Table 15 on Page 110.
To insert a pause or flash signal in the number, see “Speed Dial Pause” on Page
66.
4. Press
5'/ (or ) The number is stored.
➤ Repeat the previous procedure, except for Step 3. For Step 3, press [PDN] +
CO Line access code before the telephone number. See “CO Line Access
Codes” on Page 108.
1. Access a CO Line.
If your 6' button
programmed to
automatically access
a CO line, skip this
step.