Filter
Top Products
Features
DTMF Tone Dialing with and #
Strata DK Electronic Telephone 5/00 45
➤ To call/monitor a door phone
DTMF Tone Dialing with
and #
You may have to send
and DTMF tones to some devices or services, such as a
voice mail device or computer output service. DTMF tones are automatically enabled
on stations with
5'/ and 6'6. If you do not have 6'6 and 5'/, you must first dial
, to enable these tones.
This feature disables the Speed Dial feature during the call. Speed Dial is restored
when you complete the call or place it on hold.
➤ To output
and DTMF tones on a telephone without a SDS/RDLbutton
1. With the handset
off-hook, press a
[DN].
You hear dial tone and the LED flashes (in-use).
2. Dial the [DN] for the
desired door location.
A two-way talk-path exists between your telephone
and the called door phone. You can audibly monitor
the area around the door phone.
Note Door phone [DNs] can be stored on 6'
buttons. See “Speed Dial–Advanced Features”
on Page 63.
➤ Press
, then You can now output
and , DTMF tones, and digits
~ for the duration of the outside call. This
procedure must be repeated on each call when you
require such output.