Filter
Top Products
LCD Operation
Memos
96 Strata DK Electronic Telephone 5/00
Memos
Speed Dial Memos
You can store names (12 characters maximum) for each of 40 station speed dial
numbers. The memo pad of names can be scrolled to select the appropriate party. The
station must be enabled via system programming for LCD message memory.
➤ To program Speed Dial names and numbers
➤ To display the SD number and memo
1. Press
5'/ (or ),
then
6'6 (or
).
2. Dial a station speed
dial code.
See Table 14 on Page 110
for speed dial codes.
3. Press
02'(. If a name was previously
stored on this code, it
appears on the top line.
4. Enter the name or
memo (12 characters
maximum).
The name appears on the bottom line as you enter it.
(See “To enter LCD characters” on Page 86.)
5. Press
02'(.
6. Enter a phone number
(16 characters
maximum).
The number displays on the top line as you enter it.
7. Press
5'/ (or ) to
record data in
memory.
➤ Press
02'( +
;a;.
X~X is the speed dial number to be displayed.
# * 10 SPEED DIAL
*10 NAME
SPEED DIAL