Features
Call Forwarding
Strata DK Electronic Telephone 5/00 25
Call Forwarding
If your telephone has been system programmed for a &DOO)RUZDUG button, you can
use a
&DOO)RUZDUG button to set the feature for a [PDN].
If your telephone has more than one [DN], you can assign Call Forward destinations
for each [DN] on your telephone (one [PDN] and up to eight [PhDNs]). Each [DN]
can be independently set for a different Call Forward feature.
Call Forward must be set before the call is received and has priority over the Station
Hunt feature. To set call forward from a [PDN] or [PhDN], you must set the call
forward from your telephone, and it must be programmed as the owner of the [PDN]
or [PhDN].
Note If you hear a re-order tone when following any of the Call Forward steps, your
telephone is not the owner of the [PDN]/[PhDN].
After Call Forward is set, the following calls to your station are forwarded except in
Call Forward-External mode:
♦ Internal calls (handsfree and OCA calls optionally may or may not).
♦ Auto Attendant calls.
♦ CO Line calls that ring only on your station.
♦ Transferred CO Line or station calls.
Note CO lines that ring more than one station do not forward.
Access Codes
If your telephone has not been programmed for &DOO)RUZDUG buttons or you are
forwarding a [PhDN], you must use access codes, such as
, to set the Call
Forward feature.
LCD Telephones
The LCD on your telephone provides you with call forwarding information. The LCD
examples below are identical to those on your telephone LCD. At times, the entries on
the display scroll off the LCD and only portions of the entries remain.