Filter
Top Products
DSS Console
Features
Strata DK Electronic Telephone 5/00 105
Speed Dial
Your DSS Console may be equipped with 6' buttons that can be programmed to dial
telephone numbers or to access features.
6' buttons on the console function like 6'
buttons on electronic telephones. See Chapter 2 – Features, beginning on Page 18 for
detailed information.
Paging
You can make an announcement page to a group of station telephone speakers selected
in system programming with
$& on the DSS Console. 6' (if programmed) can be
used for page announcements. See “All Call Voice Page” on Page 22.
Call Forward Override
Either the [DSS] buttons on your DSS Console or the dial pad on the associated
telephone can be set in system programming to ring stations that are in the Call
Forward mode instead of being forwarded. Usually the console’s telephone is the unit
activated to perform this function. This feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
Important! DSS buttons cannot override Call Forward.
➤ To override call forward with your DSS associated telephone
➤ To override call forward with your DSS Console
➤
Press the station [DSS] set for call forward.
Night Transfer
You can use the DSS Console to make the system ring different telephones for
incoming calls during different times of the day. See the Strata DK System
Administrator Guide for more information on Night Transfer.
1. Press &21)7516
or [PDN].
2. Dial the station
number set for call
forward.
Make the call as you would from any other station.
This procedure assumes your station has a typical
program setting.