Filter
Top Products
Operating Mode
This is used to select an operating mode for programming the mode specific pointers. Examples of operating modes
are Day, Night or Holiday. This field does not set the operating mode for the system, that is done in the schedule
table. This selection allows you to program different destinations called event pointers for each mode.
Press ENTER on this field and all the mode blocks will be displayed. Choose the mode you would like to program. If
you select 'Default' it means all the time - unless another mode is entered to override the default setting. If you want
the same setting to be in effect all the time, simply program the 'default' mode and leave the settings for all other
modes blank.
Call Director
This is used to program the target for specific conditions or events. To edit any of the Event Pointers, select the
Event and press ENTER to bring up the Target Generator. Select and open the appropriate Block type from the Target
Generator pick list. Highlight and open and existing Block of that type or create a new Block. Press 'Ctrl + O' to
review or edit the selected Block. The possible Events are:
ESCAPE Pointer The Block to go to if the caller presses the Escape digit to escape from an announcement (the
Escape digit may be pressed anytime during the play of the announcement). It is recommended that the target Block
be the initial MENU Block. This allows the caller to return to the main options.
NO-ENTRY Pointer This is the Block to go to if the caller is prompted to replay the announcement and does not
enter anything.
INVALID Pointer This is the Block to go to if the caller enters data (DTMF) that is not recognized by the system
AUDIOLIB This is the block to go to if an announcement is selected (See page 1 of 3 - Search Targets).
Block Types and Descriptions
38