Samsung SVMi-8 Answering Machine User Manual


 
Caller Interface
Wait for Caller Entry This is the number of seconds, from 0 to 20, SVMi-8 waits for an entry after the caller has
been prompted to replay the announcement. The time begins at the end of any prompt that requests an entry from
the caller.
Repeat Pmts if NO Entry Indicates the number of times, from 0 to 9, the replay prompt is repeated, if no entry is
made by the caller.
Offer to Replay ANN This parameter provides the caller the ability to replay each announcement after play. If this
parameter is set to 'N' the caller will not be offered the option of replaying the announcement.
Empty ANN Prompt A prompt that will play when there is no recorded voice for the announcement selected. Valid
entries are 0001 - 9999 with blank indicating "say nothing." Press 'Ctrl + O' to review or edit the prompt text.
Disk is Full Prompt A prompt which will be played when the announcement storage unit is unable to record an
announcement of the Max ANN Length. Valid entries are 0001 - 9999 with blank indicating "say nothing." Press 'Ctrl
+ O' to review or edit the prompt text.
Offer To Replay the Prompt A prompt, after the announcement has played, which instructs the caller to dial the
Digit to Replay, to hear the announcement again. Valid entries are 0001 - 9999 with blank indicating "say nothing."
This prompt will not be played if "digit to replay message" is blank. Press 'Ctrl + O' to review or edit the prompt text.
Get Password Prompt A prompt which instructs the subscriber to enter their admin password. Press 'Ctrl + O' to
review the prompt text.
Invalid Entry Prompt The number of the prompt to play if the caller makes an invalid entry. Press 'Ctrl + O' to
review the prompt text.
Retention
Days The number of days, from 1 to 999, that the SVMi-8 will retain an announcement if it is not played.
Plays The maximum number of times an announcement will be played before being automatically erased. If set to
zero, there is no limit on the number of times played.
Refresh When this parameter is set to 'Y', the announcement(s) played during the call session will have the reten-
tion time reset to the value set in the Retention Days parameter of this Audiotext Librarian. If this parameter is set to
'N', the announcement retention time is controlled by the retention time in the announcement.
Block Types and Descriptions
32