Filter
Top Products
System Timers
Screen Timeout This is the time before the administration screen will revert to the port status screen.
Daily Maintenance Time This is the time when SVMi-8 performs routine daily maintenance. Daily maintenance will
save the system tables and perform message purging (Voice Mail or Announcement features). Inputs must be speci-
fied in 24-hour time. The default setting is 3:00 AM.
Maintenance will not occur until:
a) It is after the daily maintenance time, and
b) 23 hours have elapsed since startup or the last daily maintenance interval.
Additionally the system will perform an orderly reset after approximately 240 days of operation right after daily main-
tenance.
System Passwords
Subscriber Default Password The digits used as the default settings for extension and mailbox passwords. The
digit input may be from 1 to 8 digits. When a mailbox or extension password is reset, this is the value that the pass-
word will be reset to. The default setting is 0000.
System Admin This effects both the GUI and the TUI. With the GUI (Graphical User Interface); this password gives
the administrator access to all parameters. It is the highest level password and enables the administrator access to
shutting the system down. With the TUI (Telephony User Interface), this password along with the remote login pro-
cedure gives the administrator access to recording system prompts and overriding the scheduling by engaging a
specific mode.
Application Admin This works with the GUI only and denies access to only three areas: System Wide Parameters,
Exit SVMi-8, and Port Activity. This is typically given out to an administrator's assistant. Though accessing the sys-
tem with this password could still allow the user to damage the application, they would not be able to shut down the
system or change the passwords.
System Main Menu
8
SSyysstteemm WWiiddee PPaarraammeetteerrss
Page 2 of 3