Filter
Top Products
2
Programming Methods
Data may be entered and changed in the SVMi-8 by three methods. These are, the Screen Interface, DTMF System
Administration, and DTMF Subscriber Administration.
The Screen Interface
Most of the programming is achieved using a PC attached to the SVMi-8 serial port. This makes use of a graphical
user interface (GUI), and is considered necessary for initial set up.
Knowledge Requirements
A general knowledge of PC's and Windows is required. Some understanding of serial port communications is
advised.
Equipment Requirements
A Windows PC running HyperTerm (or equivalent) is needed. You will also require a serial cable with straight through
wiring. (If you already have a cable for programming the Samsung CADENCE card, you can use this.)
5