Filter
Top Products
3
Programming Categories
When programming the SVMi-8 there are three types of data: Subscriber Options, SVMi-8 Administration Options,
and Phone System Options.
Subscriber Options
These are the options entered by a subscriber, that control the individual behavior of their mailbox. The instructions
for this can be found in the SVMi-8 System User Guide.
SVMi-8 Administration Options
This is all the programming options for the SVMi-8, that are unique to the particular installation.
DCS / DCS COMPACT II / iDCS 500 Related Options
This is a collection of the programming options to make SVMi-8 operate correctly. When the SVMi-8 is initialized,
much of the set up is completed, but there is still some phone system programming that must be entered.
Note that if the SVMi-8 card is being installed in an existing system (a system that did not previously have an SVMi-
8), you will have to use MMC 806 to pre install the card and MMC 724 to assign extension numbers to each SVMi-8
port. Use any available numbers.
In addition to the MMCs listed below you must set call forwarding to the SVMi-8 at every phone that wants to use
voice mail.
MMC Listing
The following is a listing of all the system MMCs that relate to the SVMi-8.
#DCS COMPACT II
MMC 110 MMC 207 MMC 308 MMC 309
MMC 408 MMC 501 MMC 601 MMC 701
MMC 722 MMC 723 MMC 724 MMC 727
MMC 750 MMC 751 MMC 752 MMC 753
MMC 754 MMC 755 MMC 756
10
MMC 757