Filter
Top Products
TESTING THE HARDWARE
1. Call each SVMi-8 port individually and confirm that SVMi-8 answers.
2. Call group 529 / 549 and confirm that SVMi-8 answers.
If steps 1 and 2 above proved to be successful you have completed the installation and setup of the SVMi-8
hardware.
You are now ready to begin programming the SVMi-8 Voice Mail/Auto Attendant system parameters. See the
SAMSUNG SVMi-8 Programming Section.
Correct System Shutdown
Whenever possible the following procedure should be followed when shutting down the SVMi-8 system.
From the Main Status Screen (showing activity and port status):
1. Press 'Escape' and enter passcode
2. Select 'Operating Utilities'
3. Select 'Exit the SVMi-8'
4. Enter Administrator’s passcode
The SVMi-8 will now shut down. When the system shows a DOS command line you may power off the system and
unplug the SVMi-8 card.
SVMi-8 Set Up with DCS Phone Systems
9