Filter
Top Products
Section 300-Installation About This Manual
DBS-2.3/9.2-300 DBS Manual - Revised April 2000 xi
About This Manual
Purpose
This manual provides installation instructions for the Digital Business System
(DBS). The following table summarizes the purpose of each chapter.
Related Information
Appendix A and Appendix B, located in the back of this manual.
For instructions on DBS programming, see Programming Guidance (Section
400).
For detailed descriptions of DBS features, see Feature Operation (Section
700).
Chapter
No.
Title Purpose
1 Requirements Includes DBS model numbers and FCC information that
may be required during installation. In addition,
environmental requirements are included to ensure proper
operation.
2 System Overview Provides an overview of the DBS. The overview includes
descriptions of the cabinet, system configurations, printed
circuit cards, and the call processor.
3 Cabinet Installation Explains how to install and power up the cabinet. Before
you begin installation, be sure to read Chapter 1 -
“Requirements.”.
4 Trunks and Lines Describes trunk and line installation. See the “Peripheral
Equipment” chapter for instructions on connecting
peripheral equipment through trunks or lines.
5 Peripheral
Equipment
Describes peripheral equipment installation. Some
peripheral equipment also requires trunk and/or line
interfaces (door phones or power failure units, for
example). For information on trunk and line connections,
see Chapter 4.
6 Double-Cabinet
Systems
Explains installation procedures for two-cabinet systems.
7 Specifications Contains frequently referenced DBS specifications.