Filter
Top Products
Page 10 Introduction to Your Palm IIIc™ Organizer
Serial connector
Connects your organizer to the cradle, which in
turn connects to the back of your computer and
through the AC adapter to the wall current. This
allows you to recharge your organizer as well as
update the information between your organizer
and computer using HotSync technology.
Note:
The cradle must be plugged into the
serial (COM) port at the back of your
computer.
Your organizer requires a dedicated port. It
cannot share a port with an internal modem or
other device. If you are unsure about the exact
location of the serial port on your computer, refer
to the user’s manual supplied with the computer.
Important:
Only use the AC adapter that came
with your organizer. Other adapters
could damage your organizer and
will void the warranty.