Over And Back 180 PDAs & Smartphones User Manual


 
Chapter 7 Page 187
4. Repeat steps 2 and 3 until the login script is complete.
5. Hold Option and press Return to finish.
Deleting a service template
There is only one way to delete a service template: use the Delete command from the Service
menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Press Menu .
4. Under Service, select Delete (/D).
5. Hold Option and press Return to finish.
Send Transmits specific characters to the TCP/IP server to which you are
connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP server to which you
are connecting.
Send User ID Transmits the User ID information entered in the User ID field of the Network
Preferences screen.
Send
Password
Transmits the password entered in the Password field of the Network
Preferences screen. If you did not enter a password, this command prompts
you to enter one. The Password command is usually followed by a Send CR
command.
Delay Tells your communicator to wait a specific number of seconds before
executing the next command in the login script.
Get IP Reads an IP address and uses it as the IP address for your communicator.
This command is used with SLIP connections.
Prompt Opens a dialog box and prompts you to enter text of some kind (for example,
a password or a security code).
End Identifies the last line in the login script.