Filter
Top Products
Chapter 7 Page 181
Adding telephone settings
When you select the Phone field, your communicator opens a dialog box in which you define the
telephone number you use to connect with your ISP or dial-in server. In addition, you can also
define a prefix, disable Call Waiting, and give special instructions for using a calling card.
Note: The Phone Setup dialog box works correctly for AT&T and Sprint long-distance services.
However, because MCI works differently, MCI customers need to put the calling card
number in the Phone # field and the phone number in the Use calling card field.
To enter your server phone number:
1. Tap the Phone field.
2. Enter the phone number you use to reach your ISP or dial-in server.
3. If you need to enter a prefix or disable Call Waiting, skip to those procedures. Otherwise, hold
Option and press Return to finish.
Entering a prefix
A prefix is a number that you dial before the telephone number to access an outside line. For
example, many offices require that you dial “9” to dial a number outside the building.
To enter a prefix:
1. Tap the Dial Prefix check box to select it.
2. Enter the prefix.
3. Hold Option and press Return to finish.
Enter your ISP phone
number here
Enter your
prefix here
Select this
box if you
need to use
a prefix