Nortel Networks I2004 IP Phone User Manual


 
78 Setting DHCP parameters
NN10042-113
[Standard—Nortel Networks Confidential]
Begin the initialization process
To begin the initialization process, at the flashing Nortel Networks screen, quickly
press each of the four softkeys (located at the bottom of the display screen) once,
pressing from left to right.
If your network supports DHCP go to page 78. If your network does not support
DHCP go to page 80.
If your network supports DHCP
1 If your i2004 network supports DHCP, enter the configuration parameters at
the prompt in the display area of your phone as described in Table 9.
Tip: If you miss the flashing introduction screen, unplug and plug in
your i2004 Internet Telephone to reach the configuration screen where
you can press the softkeys.
Tip: You may need to contact your system administrator to check
whether your network supports DHCP.