Nortel Networks I2004 IP Phone User Manual


 
6 Chapter 1 Setting up and initializing your i2004 Internet Telephone
NN10042-113
[Standard—Nortel Networks Confidential]
Step 1: Enter an activation key
When the i2004 successfully connects to the server, the Enter Activation Key
screen appears.
if the telephone successfully connects to the
server and the display prompts you for your
login id
the i2004 has been provisioned but a user
has not been assigned. Go to “Step 2:
Logging in to your i2004 Internet
Telephone” on page 7.
if the telephone successfully connects to the
server and the idle display screen appears
you are ready to use your telephone. Go
to Chapter 2, “Introducing the i2004
Internet Telephone,” on page 13.
Tip: You may need to contact your system administrator to determine
the correct information to use during the initialization procedure.
Tip: If your i2004 Internet Telephone cannot locate the server, it will
automatically retry every two minutes. After several attempts, if your
telephone set does not locate the server, contact your system
administrator for assistance.
Table 1 Initializing options
When you power up your i2004 Internet
Telephone ... Then ....
06/06 9:31!am
User!Login
Enter!ID!and!Press
Login:
>!Tom
Login NoAlpha
06/06
9:31!am
!!!!!!!!Welcome
!!!!!!!!OnHook
!!!!!View !!!!!!!!!Servcs !!!!!!!!!DND !!!!!!!!!Config
!!!!!!!Tom