Nortel Networks I2004 IP Phone User Manual


 
Chapter 4 Making calls 43
i2004 Internet Telephone User Guide
[Standard—Nortel Networks Confidential]
1 jdoe uses the navigation buttons to highlight the inactive call with mjane.
2 jdoe presses the Switch softkey or the line button next to jdoe’s name on the
screen. The call between csmith and jdoe is put on hold.
3 Once again, the call between mjane and jdoe becomes active, and mjane’s line
remains highlighted. The phone icons on the screen indicate the state of both
calls.
4 When the active call is switched, the display changes. The hold icon appears
beside the call on hold and the off-hook icon appears beside the active call.
5 Highlighting csmith’s call and pressing the Switch softkey will place mjane
on hold and switch the call back to csmith.
Ending a call
To end an active call, press the Goodbye button or put the handset on the receiver.
In the following example, jdoe is conversing with mjane. mjane's call is
highlighted. To end this active call
1 jdoe presses the Goodbye button or puts the handset on the receiver. The call
is released between jdoe and mjane. The call between jdoe and csmith is left
on hold. The information about the call between jdoe and csmith is displayed
using the full screen. jdoe presses the Hold softkey to resume conversation
with csmith.
Tip: Switching between calls works for both incoming and outgoing
calls.