Nortel Networks I2004 IP Phone User Manual


 
Chapter 3 Configuring the i2004 Internet Telephone 29
i2004 Internet Telephone User Guide
[Standard—Nortel Networks Confidential]
Setting IM display
You can choose to block all incoming instant messages so that the text does not
appear on the telephone display. The default setting is ON. To change the IM
display setting
1 Press the Config softkey.
2 Highlight the Preferences option and press the Select softkey.
3 Highlight the IM Display option and press the Change softkey.
4 Press the Ok softkey to change the IM Display option or press the Cancel
softkey to exit.
Setting Ignore action
You can set the actions of the Ignore softkey. The Local setting stops an incoming
call from ringing on your i2004 Internet Telephone, any other devices defined in
your ring list continue to ring for the duration of the ring list before advancing to
the next ring list. The Network setting stops the incoming call from ringing on all
devices defined in your ring list and forwards the call to the next ring list (if
defined). For example, you may set up your ring list sequence to go to your
voicemail account.
1 Press the Config softkey.
2 Highlight the Preferences option and press the Select softkey.
3 Highlight the Ignore Action option and press the Change softkey.
4 Press the Ok softkey to change the Ignore Action option or press the Cancel
softkey to exit.
Tip: For more information about creating a ring list refer to the SIP
Personal Agent User Guide.