Nortel Networks I2004 IP Phone User Manual


 
Chapter 1 Setting up and initializing your i2004 Internet Telephone 3
i2004 Internet Telephone User Guide
[Standard—Nortel Networks Confidential]
a For a telephone not sharing a LAN access with a PC:
Connect one end of the Ethernet cable to the Ethernet plug (identified
with a network icon) on the telephone, and the other end to your 10/
100-BaseT Ethernet jack.
b For a telephone sharing a LAN access with a PC:
Complete step a and connect one end of a second Ethernet cable to the PC
Ethernet port on the back of the telephone and the other end to the
computer’s Ethernet port.
3 Plug the AC adapter plug into the base of the telephone.
4 Plug the AC adapter into the nearest electrical outlet.
5 Connect the base to the telephone set. To do this you must first ensure that
your power cable and handset cable are properly fitted into the provided slots.
6 Once the power cable and handset cable are secured tightly in place and flush
with the bottom of the phone set, take the base and hinge it into the plastic
slots at the front of the phone set. Then, press the back of the base into the
back of the telephone.
7 To lock the base in place, depress the light gray button at the back of the
phone set while carefully pressing the base into place. Release the button to
lock the base once it is in place.
Tip: If you have trouble locking the base, or if the phone wobbles on
your desktop, re-examine the phone’s cables to ensure the cables are not
obstructing the base.