Nortel Networks I2004 IP Phone User Manual


 
46 Chapter 4 Making calls
NN10042-113
[Standard—Nortel Networks Confidential]
5 Press the Ok softkey to return to an idle display or, if the transfer failed, press
the line key to reconnect the call.
Call transfer with consult
While on a call, you can call another address, speak with the person at the new
address, and then transfer the original call to the new address. You must be the
caller in order to initiate a transfer with consult.
To transfer with consult
1 Press the Trnsfr softkey.
2 Enter the address where you want to transfer this call. Or, press the quick
buttons to access and select an entry from the inbox, outbox or address book.
3 Press the Trnsfr softkey. The display prompts you to select whether or not
you want to consult with the called party.
4 Press the Yes softkey to consult with the party you are calling. The original
called party is put on hold. The call to the new address rings.
5 Consult with the party you wish to transfer the first call too. Press the Trnsfr
softkey to complete the transfer or Cancel to disconnect and return to the
original call. The display confirms if the transfer is complete or fails.
6 Press the Ok softkey to return to an idle display or, if the transfer failed, press
the line key to reconnect the original call.
Incoming call options
The following softkey options are available for incoming ringing calls:
Table 8 Softkey options for ringing calls
Softkey Description
Answer Answers the call.
Redrct Allows you to redirect the call to
another address.