Filter
Top Products
Customizing your telephone 93
P0908510 Issue 01 Enterprise Edge Feature Programming Telephone Guide
Enterprise Edge default button assignments
During Startup, the Enterprise Edge installer chooses one of the available templates.
Default features are assigned automatically to the programmable buttons on
Enterprise Edge telephones, and vary with the template and the telephone. The
default features are listed in the following tables in this chapter.
Rules of default button assignment
Line and Intercom buttons are assigned by default templates and can be changed in
programming. Handsfree/Mute and answer buttons are not assigned by default. If
these features are defined, however, they are automatically assigned to specific
buttons, as described on this and the following page. None of these buttons can be
assigned to M7100 telephones.
The Handsfree/Mute feature appears on the bottom right-hand button, moving the
Intercom button(s) up one position.
Each telephone can have up to eight Intercom buttons. They appear above the
Handsfree/Mute button at the bottom right-hand position on your telephone.
Each telephone can have up to four answer buttons. They appear above Intercom
buttons in the right column and continue up from the bottom in the left column,
replacing the features on those buttons.
External line buttons appear in ascending line order, starting at the top button in the
left column (the top button on the M7208 telephone). If more than five external
lines are assigned to a M7310 telephone, or more than 12 to a M7324 telephone,
assignment continues down the buttons on the right column, erasing the features on
those buttons. Line buttons have priority over feature access buttons but not
Handsfree/Mute, Intercom, or answer buttons.
Tips
Enterprise Edge telephones are shipped from the factory with the button caps
in place for the PBX template.
Please consult your customer service representative to determine the type of
template programmed into your system before applying button assignments.