Filter
Top Products
92 Customizing your telephone
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Applying button cap labels
Before you apply button labels, activate the Button Inquiry feature (
ƒ•‚
)
to verify the button functions, and to avoid activating features as you put the labels
onto the buttons. For more information refer to Finding out what a button does using
Button Inquiry on page 89.
Types of button caps
• Unlabeled, clear button caps
with appropriate green or grey paper for typing in line numbers, telephone
numbers, and features
• Pre-printed, colored button caps
in green or grey
Some examples of pre-printed button caps
Identifying the telephones
1. Write the individual telephone numbers on the labels and attach them to the
appropriate Enterprise Edge telephones.
2. Write the telephone number and the internal number on the appropriate
receiver card
for each type and color of telephone that is to be installed.
3. Cover the
receiver card
underneath the receiver of each telephone with the
plastic lens.
Tip
Keep the extra labels and button caps with each Enterprise Edge telephone.
Green caps Grey caps
¬ µ
© ß
Tip
To make identification of line types easier, use preprinted green button caps
for lines that support incoming and outgoing calls. Use clear button caps for
target lines that are incoming only.