Filter
Top Products
70 Forwarding your calls
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
Turning the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200 milliseconds) when a call is
redirected on one of its lines.
You need to start a Unified Manager session to program this feature. See Getting
Started on page 13 for more information.
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a Redirect ring setting: Yes or No.
Displays while redirecting lines
Tip
If a telephone has redirect ring enabled, it rings briefly for redirected calls on
one of its lines even if another telephone set up the line redirection.
You selected the intercom button as the facility on
which to place the call. Enter a line pool code or a
destination code.
Press
•
or
ADD
to begin redirection. Press
£
or
REMOVE
to cancel a previous redirection.
You have one external line on your telephone, but you
need a second line to perform line redirection. Redirect
your external line using a line pool as the outgoing line.
You are attempting to redirect a line and the line you
have chosen is the outgoing line you have selected as
a destination. You cannot redirect a line to itself. Select
another line.
Enter a valid line pool access code.
You have attempted to redirect a line, but someone
else has already redirected that line. Press
•
or
OVERRIDE
to override the previous redirection and
redirect the line as you want.
You can redirect calls only on individual lines.
Intercom
Line Redirection
QUIT ADD REMOVE
No line to use
Outgoing line
Pool code: ___
QUIT
Redir by 221
OVERRIDE
Redirect denied